Removal Procedure
Courtesy of GENERAL MOTORS COMPANY
- Remove the fuel tank. Refer to Fuel Tank Replacement .
- Disconnect the evaporative emission and fuel lines (1). Refer to Plastic Collar Quick Connect Fitting Service .
- Disconnect the electrical connector (2).
Courtesy of GENERAL MOTORS COMPANY
- Using the CH 45722
wrench, emove the lock ring (1) by turning counter-clockwise.
Courtesy of GENERAL MOTORS COMPANY
- Partially raise the fuel pump module and disconnect the vent valve connector (1). Refer to Plastic Collar Quick Connect Fitting Service
Courtesy of GENERAL MOTORS COMPANY
- Remove the fuel pump module (1) and O-ring (2). DISCARD the O-ring.