LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying CKP Sensor To Engine Block Retaining Bolt
    GM1949785Courtesy of GENERAL MOTORS COMPANY
  1. Install the CKP sensor (2) to the engine block.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the CKP sensor to engine block retaining bolt (1) and tighten to 10 N.m (89 lb in).
    3. Fig 2: Identifying CKP Electrical Connector
    GM1949783Courtesy of GENERAL MOTORS COMPANY
  3. Connect the CKP electrical connector (3) to the CKP sensor.
  4. If equipped with all-wheel drive, install the right side catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LFX) .
  5. Lower the vehicle.
  6. Perform the crankshaft variation learn procedure. Refer to Control Module References .
scientia non olet · About LEMON Manuals