LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Line Replacement - Chassis >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Fuel Feed Connector, Evaporative Emission Connector, Exhaust Heat Shield Fasteners & Exhaust Heat Shield
    GM2194736Courtesy of GENERAL MOTORS COMPANY
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Disconnect the fuel feed connector (1) and the evaporative emission connector (2). Refer to Metal Collar Quick Connect Fitting Service , and Plastic Collar Quick Connect Fitting Service .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the exhaust heat shield fasteners (3) and the exhaust heat shield (4).
    5. Fig 2: Exhaust Heat Shield Fastener & Exhaust Heat Shield
    GM2194739Courtesy of GENERAL MOTORS COMPANY
  5. Remove the exhaust heat shield fastener (1) and the exhaust heat shield (2).
    6. Fig 3: Brake Pipe Heat Shield Fastener & Heat Shield
    GM2194740Courtesy of GENERAL MOTORS COMPANY
  6. Remove the brake pipe heat shield fastener (1) and the heat shield (2).
    7. Fig 4: Plastic Retainer & Retaining Nut
    GM2194746Courtesy of GENERAL MOTORS COMPANY
  7. Remove the plastic retainer (1) and the retaining nut (2).
    8. Fig 5: Fuel Feed Line & Evaporative Emission Line Clips
    GM2194747Courtesy of GENERAL MOTORS COMPANY
  8. Separate the fuel feed line and the evaporative emission line from the clips (1).
    9. Fig 6: Protector Bracket Fasteners & Bracket
    GM2194773Courtesy of GENERAL MOTORS COMPANY
  9. Remove the protector bracket fasteners (1) and remove the bracket (2).
    10. Fig 7: Fuel Feed Line & Evaporative Emission Line
    GM2194775Courtesy of GENERAL MOTORS COMPANY
  10. Disconnect the fuel feed line (1) and the evaporative emission line (2). Refer to Metal Collar Quick Connect Fitting Service , and Plastic Collar Quick Connect Fitting Service .
  11. Remove the pipes (3) from the vehicle.
scientia non olet · About LEMON Manuals