LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: MAP Sensor & Retaining Bolt
    GM2219477Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW MAP sensor seal.
  2. Install the MAP sensor (2) to the intake manifold assembly.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the MAP sensor to intake manifold retaining bolt (1) and tighten to 4 N.m (35 lb in).
  4. Connect the engine wiring harness to the manifold absolute pressure (MAP) sensor (2).
  5. Install the intake manifold cover. Refer to:Intake Manifold Cover Replacement - Rear
scientia non olet · About LEMON Manuals