Transmission Assembly: Remove, Install, and Overhaul
Includes: Inspect and replace all necessary components, clean and check Converter, flush Oil Cooler Lines, adjust and road test.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Automatic Trans | Includes: Programming.
DOES NOT include wheel alignment. | 21.3 | | A |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Automatic Trans, Rear | Includes: R&I Bell Housing. | 1.3 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Automatic Trans, At Engine | Includes: R&I Bell Housing. | 1.1 | | C |
| Automatic Trans, At Trans,Flex Plate | | 0.3 | | C |