Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Power Steering Assist Motor Bolt (NJ1 Only) (1)	8 N.m	71 lb in
Steering Gear Bolt (1)
First Pass	110 N.m	81 lb ft
Final Pass	150 Degrees
Steering Gear Heat Shield Fastener	9 N.m	80 lb in
Steering Gear Wiring Harness Bracket Bolt	9 N.m	80 lb in
Steering Linkage Inner Tie Rod	100 N.m	74 lb ft
Steering Linkage Inner Tie Rod Nut	60 N.m	44 lb ft
Steering Linkage Outer Tie Rod Nut
First Pass	35 N.m	26 lb ft
Final Pass	30 Degrees
1. Torque-to-yield fastener in use, requires NEW bolt.