LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> SS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LS3) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    WARNING:

    Refer to Battery Disconnect Warning .

  1. Disconnect the battery ground cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
    3. Fig 1: Camshaft Position Sensor Electrical Connector
    GM3292851Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the camshaft position (CMP) sensor electrical connector (1).
    4. Fig 2: CMP Sensor, O-ring & Bolt
    GM3292850Courtesy of GENERAL MOTORS COMPANY
  4. Remove the CMP sensor to engine front cover retaining bolt (1).
  5. Remove the CMP sensor (2) from the engine front cover.
  6. Remove and DISCARD the CMP sensor O-ring (3).
scientia non olet · About LEMON Manuals