LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> SS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LS3) - Repair Instructions >> Repair Instructions >> Throttle Body Cleaning
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body Cleaning

    NOTE:

    Over extended time and mileage, deposits may accumulate on the back of the throttle valve plate. Occasionally the deposit may accumulate to a point where perceived pedal effort is affected. This procedure should not be performed on vehicles with low mileage, under 80 450 kilometers (50,000 miles).

    CAUTION:

    Do not insert any tools into the throttle body bore in order to avoid damage to the throttle valve plate.

  1. Remove the air outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Inspect the throttle body bore and inspect the throttle valve plate for deposits. The throttle valve must be opened in order to inspect all surfaces.
    CAUTION:

    Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.

  3. Clean the throttle body bore and the throttle valve plate using a clean shop towel with an approved top engine cleaner.
  4. Install the air inlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  5. Perform the Throttle/Idle Learn procedure. Refer to Q38 Throttle Body: Throttle/Idle Learn .
scientia non olet · About LEMON Manuals