Antilock Brake System - Diagnostic Trouble Codes
ANTILOCK BRAKE SYSTEM - DIAGNOSTIC TROUBLE CODES
| DTC | Description |
|---|---|
| DTC B2745 | Traction Control Switch |
| DTC C0035-C0050, C1207-C1210, C1221-C1228, or C1232-C1235 | Wheel Speed Sensor |
| DTC C005A | Malfunction of Both Wheel Speed Sensors on One Axle |
| DTC C0110, C12E0, C12E8, or C12E9 | Pump Motor |
| DTC C012A, C128B, C128E, or C12B2-C12B4 | Master Cylinder Pressure Senso |
| DTC C012B or C12B6-C12B8 | High Pressure Accumulator Pressure Sensor |
| DTC C012D, C120A, C128A, C128D, C12BC, C12BD, or C12BE | Brake Boost Regulation Pressure Sensor |
| DTC C012E or C12FE | Boost Pressure Loss |
| DTC C012F, C12A7, or C12DD | Boost Solenoid Valve |
| DTC C0161 | Brake Pedal Position Sensor |
| DTC C0186, C0187, C0196, or C0287 | Lateral Acceleration Sensor/Yaw Rate Signal |
| DTC C0201, C12E6, C12E7 | Enable Relay/ABS Switch |
| DTC C0242 or P0856 | Traction Control Malfunction |
| DTC C0245, C122E | Wheel Speed Sensor Frequency/Tire Size Mismatch |
| DTC C0256, C12E6, or C12E7 | Valve Relay/ABS Switch |
| DTC C0294, C120C, or C12F8 | Brake Pedal Position Sensor |
| DTC C0299 or C12FF | Brake Booster/Electronic Brake Control Module |
| DTC C029C, C120C, C129A-C129F, C12B1, or C12F8 | Brake Pedal Position Sensor |
| DTC C0552 or C121D | Improper Shutdown/Electronic Brake Control Module |
| DTC C0561 | System Disabled Information Store |
| DTC C056D, C127A-C127C, C12E9, C12F2-C12F6, or C12FE | Brake Control Module |
| DTC C056E | Electronic Control Unit Software |
| DTC C0574 | Printed Circuit Board Temperature Sensor |
| DTC C0710 | Steering Wheel Angle Signal |
| DTC C0870 or C12E4 | Control Module Voltage Reference/ABS Sensor Reference |
| DTC C0880, C12E5, or C120F | Control Module Voltage Reference/Brake Pedal Position Sensor |
| DTC C0898 | Control Module Power and Ground Circuits |
| DTC C1120 or C1121 | ABS Left Front Hydraulic Circuit |
| DTC C1122 or C1123 | ABS Right Front Hydraulic Circuit |
| DTC C1124 or C1125 | Base Brake Solenoid Valve/Excessive Hydraulic Circuit Test Duration |
| DTC P1B12 | Driver Intended Braking Torque Signal Message Counter Incorrect |