LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Spark LT, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.2L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement (LL0) >> Disassembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly Procedure

    Fig 1: Evaporative Emission Canister Purge Pipe
    GM3460812Courtesy of GENERAL MOTORS COMPANY
  1. Remove the evaporative emission canister purge pipe (1).
  2. Disconnect the fuel tank recirculation pipe connector (2).
  3. Disconnect the fuel tank wiring harness (3) electrical connectors from the following:
    • Fuel tank pump
    • Fuel tank pressure sensor
    • Evaporative emission canister solenoid valve
  4. Remove the fuel tank vent pipe (4).
  5. Remove the fuel feed pipe (5).
  6. Remove the evaporative emission canister. Refer to Evaporative Emission Canister Replacement (LL0) , Evaporative Emission Canister Replacement (LFM) .
  7. Remove the fuel pump. Refer to .
  8. Remove the fuel tank heat shield. Refer to Fuel Tank Heat Shield Replacement (LL0) , Fuel Tank Heat Shield Replacement (LFM) .
scientia non olet · About LEMON Manuals