Installation Procedure

Install the remote power steering fluid reservoir (2).

Fig 1: Locating Power Steering Fluid Reservoir & Bolts
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the remote power steering fluid reservoir bolts (1) and tighten to 9 (80 lb in).
Connect the power steering fluid reservoir outlet hose and clamp (1).

Fig 2: View Of Power Steering Fluid Reservoir Outlet Hose & Clamp
Courtesy of GENERAL MOTORS COMPANY
Connect the power steering reservoir inlet hose and clamp (1).

Fig 3: Identifying Power Steering Reservoir Inlet Hose & Clamp
Courtesy of GENERAL MOTORS COMPANY
Clean all excess fluid from the vehicle and remove the drain pans.
Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .