LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Front Object Alarm Sensor Wiring Harness Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Object Alarm Sensor Wiring Harness Replacement

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Object Alarm Sensor Wiring Harness
GM2792114Courtesy of GENERAL MOTORS COMPANY
Front Object Alarm Sensor Wiring Harness Replacement

Callout Component Name
Preliminary Procedures 
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Buick) .
1 Front Object Alarm Sensor Wiring Harness

Procedure

  1. Disconnect the front object alarm sensor wiring harness electrical connectors from the front object sensors.
  2. Disconnect the front object alarm sensor wiring harness electrical connectors from the front fascia wiring harness.
  3. Using a suitable tool, disconnect the front object alarm sensor wiring harness from the front fascia.
scientia non olet · About LEMON Manuals