Approximate Fluid Capacities
The following approximate capacities are given in US English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling.
| Application | Specification | |
|---|---|---|
| Metric | US English | |
| Cooling System | ||
| 2.5L LCV | 9.1 liters | 9.61 quarts |
| 3.6L LFX | 12.35 liters | 13.05 quarts |
| Engine Oil with Filter | ||
|
4.7 liters | 5.0 quarts |
|
5.7 liters | 6.0 quarts |
| Automatic Transmission 6L50 | ||
|
6.3 liters | 6.7 quarts |
|
9.3 liters | 9.8 quarts |
|
10.6 liters | 11.2 quarts |
| Transfer Case - DEXRON®VI | 1.9 liters | 2.0 quarts |
| Differential Fluid | ||
| Rear Axle - 8.0 Inch | 1.4 liters | 3.0 pints |
| Rear Axle - 8.6 Inch | 1.5 liters | 3.2 pints |
| Front Axle Differential Fluid | 1.3 liters | 2.7 pints |
| Hydraulic Brake System | 1.0 liters | 2.1 pints |
| Abrupt Refrigerant Loss | 60 ml1 | 2.0 oz1 |
| PAG Oil | ||
| Compressor Replacement | ||
|
NOTE:
Compressor failure can occur if the oil removed during refrigerant recovery is not replaced. The service compressor is shipped with 40 ml2 (1.4 oz2 ) of PAG oil. |
||
| Condenser Replacement | 30 ml2 | 1.0 oz2 |
| Evaporator Replacement | 90 ml2 | 3.0 oz2 |
| Any Line Set (Hose/Tube or Tube Assembly) Replacement | 30 ml2 | 1.0 oz2 |
| Total System PAG Oil Capacity | 90.0 ml | 3.0 oz |
| R-134a | ||
| Refrigerant Charge | 0.65 kg | 1.75 lb |
| 1
Abrupt refrigerant loss due to large leak, hose rupture, collision, or pressure relief valve opening. Conditions that allow the refrigerant to seep or bleed off over time do not cause this oil loss. Upon replacement of a component that caused a large refrigerant loss, also add the required amount of oil for the particular component. 2 If more than the specified amount of PAG oil was drained from a component, add the amount drained. |
||