LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze LTZ >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6T30/6T40/6T45/6T50) >> TCM Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCM Reprogramming

  1. If the TCM needs to be reprogrammed. Refer to Service Programming System (SPS) .
    NOTE:
    • Use a scan tool to view and record the Transmission Control Module - End Model Part Number in the original TCM prior to starting the TCM reprogramming procedure.
    • In some cases, the TCM and ECM may have to be reprogrammed. When a selection for TCM Transmission Control Module - Programming is not available, select SEQ Programming Sequence ECM/TCM (Automatic Transmission Only).
  2. Perform the Transmission Adaptive Values Learn. Refer to Transmission Adaptive Values Learn .
  1. Turn the ignition OFF for 30 seconds.
    NOTE: After programming, perform the following to avoid future misdiagnosis:
  2. Turn the ignition ON with the engine OFF.
  3. Use the scan tool in order to retrieve history DTCs from all modules.
  4. Clear all history DTCs.
scientia non olet · About LEMON Manuals