Removal Procedure
- Relieve the fuel system pressure. Fuel Pressure Relief
- Drain the fuel tank. Fuel Tank Draining
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove Exhaust System. Exhaust System Replacement
- Remove Propeller Shaft. Propeller Shaft Replacement
- Remove Fuel Tank Heat Shield.
- Remove Parking Brake Rear Cable -Left Side. Parking Brake Rear Cable Replacement - Left Side
- Remove Parking Brake Rear Cable - Right Side. Parking Brake Rear Cable Replacement - Right Side
- Lower the rear frame. Rear Frame Replacement
- Disconnect Evaporative Emission Line (1).Plastic Collar Quick Connect Fitting Service
- Disconnect Electrical Connector (2).
- Remove Hose Clamp (1).
- Remove Fuel Tank Filler Hose (2).
- Disconnect Evaporative Emission Line (3).Plastic Collar Quick Connect Fitting Service
- Disconnect Electrical Connector (1).
- Disconnect Fuel Feed Line (2). Plastic Collar Quick Connect Fitting Service
- Disconnect Evaporative Emission Line (3).Plastic Collar Quick Connect Fitting Service
- Support the fuel tank with a suitable jack.
- Remove Fuel Tank Strap Fastener (1).
- Remove Fuel Tank Strap (2).
- Remove Fuel Tank (3).
- Transfer components as necessary.
WARNING:
To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .