Circuit/System Verification
- Vehicle in Service Mode.
- Verify that no other DTCs are set.
- If any other DTCs are set
- If no other DTCs are set
- Verify that DTC P1FFF is not set.
- If DTC P1FFF is set
- With a scan tool, command the DC Charging Disabled Reset. With a scan tool, Clear all DTCs.
- Vehicle OFF. Vehicle in Service Mode.
- Verify that DTC P1FFF is not set.
- If DTC P1FFF is set, replace the K114B Hybrid/EV Powertrain Control Module 2.
- If DTC P1FFF is not set
- All OK.
- If DTC P1FFF is not set
- All OK.