LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Spark LS, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.2L - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement (LFM) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the fuel tank filler pipe assembly (4).
    Fig 1: Fuel Tank Filler Hose And Clamp
    GM3416008Courtesy of GENERAL MOTORS COMPANY
  2. Install the fuel tank filler pipe lower bolt (1) and tighten to 3 N.m (27 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Connect the fuel tank filler hose (3) and clamp.
  4. Connect the fuel tank vent pipe (2) and clamp.
  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
  6. Install the fuel filler pipe upper bolts (1) and tighten to 6 N.m (53 lb in).
    Fig 2: Fuel Tank Filler Pipe
    GM2810103Courtesy of GENERAL MOTORS COMPANY
  7. Close the fuel filler cap and filler door.
scientia non olet · About LEMON Manuals