LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Spark LS, Standard Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup >> Transmission Control Module (TCM) Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Module (TCM) Reprogramming

  1. If the TCM needs to be reprogrammed, refer to Service Programming System (SPS) .
    NOTE: Use a scan tool to view and record the Transmission Control Module - End Model Part Number in the original TCM prior to starting the TCM reprogramming procedure.
  2. Perform the Transmission Solenoid Values Calibration Preset. Refer to Transmission Adaptive Pressure Reset (Transmission Solenoid Valves Calibration Preset - M4M) .
  1. Turn the ignition OFF for 30 seconds.
    NOTE: After programming, perform the following to avoid future misdiagnosis:
  2. Turn the ignition ON with the engine OFF.
  3. Use the scan tool in order to retrieve history DTCs from all modules.
  4. Clear all history DTCs.
scientia non olet · About LEMON Manuals