Removal & Installation
WARNING: This page is about the Tahoe LS, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| LS,LT,LTZ,4WD, w/o Skid Plate | Includes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check. | 8.1 | C | |
| LS,LT,LTZ,4WD, w/Skid Plate | Includes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check. | 8.3 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.6 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| LS,LT,LTZ,PPV,4WD | 4.0 | A | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| LS,LT,LTZ,PPV,4WD | 0.3 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: | ||||
| 1.6 | B | |||
| Combination Procedure: TRANSMISSION OIL PUMP SEAL: Remove & Replace: | ||||
| 0.2 | B | |||