Circuit/System Verification
- Start the engine and let it idle for at least 2 hours, turn ignition switch OFF and wait at least 90 minutes. Do not turn ignition ON during the 90 minutes.
- If DTC sets, refer to Circuit/System Testing
- If DTC does not set,
- All OK.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- If DTC sets, refer to Circuit/System Testing
- If DTC does not set,
- All OK.