| Standard Trans | Includes: Bleed Clutch System. | 3.7 | 2.8 | C |
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: |
| Standard Trans, w/Clutch Removed | | 0.2 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| Standard Trans | | 0.3 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| Standard Trans, Clutch Actuator Cylinder | | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Standard Trans, Rear,w/Clutch Removed | | 0.5 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Standard Trans, w/Clutch Removed | | 0.5 | | C |