Front View Camera Replacement

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front View Camera

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the windshield multifunction sensor mounting bracket cover. Refer to Windshield Multifunction Sensor Mount Bracket Cover Replacement (Without UFL)Windshield Multifunction Sensor Mount Bracket Cover Replacement (With UFL) .
1	Front View Camera Procedure Using a suitable plastic tool, insert the tool between the edge of the front view camera retainers and the multifunction relay bracket tabs, turn the tool to release the retainers and the camera and rotate downward. Disconnect the electrical connector. After replacement of the front view camera, program the front view camera. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the windshield multifunction sensor mounting bracket cover. Refer to Windshield Multifunction Sensor Mount Bracket Cover Replacement (Without UFL)Windshield Multifunction Sensor Mount Bracket Cover Replacement (With UFL) .

Front View Camera

Procedure

Using a suitable plastic tool, insert the tool between the edge of the front view camera retainers and the multifunction relay bracket tabs, turn the tool to release the retainers and the camera and rotate downward.
Disconnect the electrical connector.
After replacement of the front view camera, program the front view camera. Refer to Control Module References .