Electronic Brake Control Module Replacement

Fig 1: Electronic Brake Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Brake Fluid Irritant Warning CAUTION: Brake Fluid Effects on Paint and Electrical Components Caution CAUTION: Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM. Preliminary Procedures Prepare electronic brake control module for replacement. Control Module References Battery Negative Cable Disconnection and Connection Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement Brake Pressure Modulator Valve Bracket Replacement
1	Electronic Brake Control Module Fastener [4x] CAUTION: Fastener Caution Tighten 3 N.m (27 lb in)
2	Electronic Brake Control Module Procedures After replacement of the electronic brake control module, refer to Control Module References Hydraulic Brake System Bleeding Brake Pressure Modulator Valve Pressure Sensor Calibration

Callout

Component Name

CAUTION: Brake Fluid Effects on Paint and Electrical Components Caution

CAUTION: Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.

Preliminary Procedures

Prepare electronic brake control module for replacement. Control Module References
Battery Negative Cable Disconnection and Connection
Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement
Brake Pressure Modulator Valve Bracket Replacement

Electronic Brake Control Module Fastener [4x]

CAUTION: Fastener Caution

Tighten
3 N.m (27 lb in)

Electronic Brake Control Module

Procedures

After replacement of the electronic brake control module, refer to Control Module References
Hydraulic Brake System Bleeding
Brake Pressure Modulator Valve Pressure Sensor Calibration