Installation Procedure

Install the engine control module and electronic brake control module bracket (1) to the transmission mount (4).

Fig 1: Transmission Mount, Body Wiring Harness Connector, Engine Control Module And Electronic Brake Control Module Bracket Bolts
Courtesy of GENERAL MOTORS COMPANY
Install the 2 engine control module and electronic brake control module bracket bolts (2, 6) and tighten to 12 N.m (106 lb in).
CAUTION: Refer to Fastener Caution .
Clip in the body wiring harness connector (5).
Body Wiring Harness (3)» Install [2x]
Clip in the engine wiring harness (1) to the engine control module and electronic brake control module bracket (3).

Fig 2: Engine Wiring Harness And Electronic Brake Control Module Bracket
Courtesy of GENERAL MOTORS COMPANY
Clip in battery positive and negative cable (3) from the engine control module and electronic brake control module bracket (1).
Engine Wiring Harness (1)» Install

Fig 3: Body Wiring Harness Connector And Electronic Brake Control Module Bracket
Courtesy of GENERAL MOTORS COMPANY
Connect the engine wiring harness connector (4) to the body wiring harness connector (3).
Clip in the body wiring harness connector (3) to the engine control module and electronic brake control module bracket (2)
Engine Control Module Bracket Replacement » Install