- Fuel Tank Pressure Sensor Replacement » Install
- Fuel Level Sensor Replacement » Install
- Install a NEW fuel pump module seal (3).
Courtesy of GENERAL MOTORS COMPANY
NOTE:
Pay attention to the fuel level sensor.
- Fuel Tank Fuel Pump Module (2)» Install
- Install the fuel tank fuel pump module lock ring (1).
- Install the CH-45722
Main Fuel Pump Locking Ring Remover/Installer (1) to the fuel pump module lock ring (2).
Courtesy of GENERAL MOTORS COMPANY
NOTE:
The fuel pump module lock ring fits only in one position, pay attention for the mounting position.
- Using the CH-45722
Main Fuel Pump Locking Ring Remover/Installer (1) and a long breaker-bar, rotate the lock ring in clockwise direction in order to lock the lock ring.
NOTE:
Do NOT use impact tools. Significant force will be required to release the lock ring. The use of a hammer and screwdriver is not recommended. Secure the fuel tank in order to prevent fuel tank rotation.
- Connect the evaporative emission canister vent pipe (2). Refer to Plastic Collar Quick Connect Fitting Service .
Courtesy of GENERAL MOTORS COMPANY
- Electrical Connector (1)» Connect [2x]
- Fuel Feed Pipe Replacement - Fuel Pump Module to Underbody » Install
- Fuel Tank Replacement » Install