LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> SS Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: EBCM & Brake Pressure Modulator Valve
    GM2196939Courtesy of GENERAL MOTORS COMPANY
  1. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
  2. Install the EBCM (1) to the BPMV.
    3. Fig 2: Electronic Brake Control Module
    GM2196936Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
  4. Connect the EBCM electrical connector.
  5. Program the EBCM. Refer to Control Module References .
  6. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals