Installation Procedure
- Use a suitable jack and install the fuel tank.
- Install Fuel Tank (3)
- Install Fuel Tank Strap (2) (Qty: 2)
- Install Fuel Tank Strap Fastener (1) (Qty: 4) and tighten to 50 N.m (37 lb ft)
- Connect Evaporative Emission Line (3) - Plastic Collar Quick Connect Fitting Service
- Connect Fuel Feed Line (2) - Plastic Collar Quick Connect Fitting Service
- Connect Electrical Connector (1)
- Connect Evaporative Emission Line (3) - Plastic Collar Quick Connect Fitting Service
- Install Fuel Tank Filler Hose (2)
- Install Hose Clamp (1) and tighten to 4 N.m (35 lb in)
- Connect Electrical Connector (2) (Qty: 2)
- Connect Evaporative Emission Line (1) (Qty: 2) - Plastic Collar Quick Connect Fitting Service
- Raise the rear frame. Rear Frame Replacement
- Install Parking Brake Rear Cable Replacement - Right Side
- Install Parking Brake Rear Cable Replacement - Left Side
- Install Fuel Tank Heat Shield and tighten to 5.5 N.m (49 lb in)
- Install Propeller Shaft Replacement
- Install Exhaust System Replacement
- Install the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Refill the fuel tank.
- Inspect for fuel leaks.
CAUTION:
Refer to Fastener Caution .