|
Preliminary Procedures
- Remove the body hinge pillar garnish molding - right side. Refer to Body Hinge Pillar Garnish Molding Replacement
.
- Remove the instrument panel insulator - right side. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Right Side
.
- Disconnect the body control module electrical connectors.
- Remove the instrument panel harness ground bolt.
- Release the retainer for the instrument panel harness to body harness inline connector. Seperate and reposition the harness, as necessary.
- Separate the body harness anchors from the body control module bracket.
|
| 1 |
Body Control Module Bracket Push Pins (Qty: 2)
Procedure
Release the bracket retaining tabs. |
| 2 |
Body Control Module Bracket
Procedure
Transfer components, as necessary. |