Removal & Installation
WARNING: This page is about the SS Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Includes: R&I Exhaust System. Includes: Lowering Subframe. Includes: Confirm Fluid temperature for level check. | 7.7 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANS OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.8 | C | |||
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: | ||||
| 1.6 | B | |||