Removal & Installation
WARNING: This page is about the SS Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Includes: R&I Exhaust System. Includes: Lowering Subframe. Includes: Bleed Clutch System. | 6.2 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| w/Actuator | 0.4 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| w/Clutch Removed | 0.3 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||