LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K20 Engine Control Module: Programming and Setup >> Replace and Program ECM or Reprogram ECM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program ECM or Reprogram ECM

To program a replacement or an existing ECM, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select ECM Programming and follow the on-screen instructions.
scientia non olet · About LEMON Manuals