Engine Assembly: Remove, Install, and Overhaul

Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters. Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
w/R-1234yf Refrigerant,w/Auxiliary Air Cond	Includes: R&I Radiator. Includes: R&I Air Conditioning Condenser; recover, evacuate and recharge Air Conditioning System. Includes: R&I Air Conditioning Compressor. Includes: Perform Safety Pressurized Pre-Charge Leak Test. Includes: Confirm Fluid temperature for level check.	39.3		A
w/R-1234yf Refrigerant,w/o Auxiliary Air Cond	Includes: R&I Radiator. Includes: R&I Air Conditioning Condenser; recover, evacuate and recharge Air Conditioning System. Includes: R&I Air Conditioning Compressor. Includes: Perform Safety Pressurized Pre-Charge Leak Test. Includes: Confirm Fluid temperature for level check.	39.2		A
w/R-134a Refrigerant	Includes: R&I Radiator. Includes: R&I Air Conditioning Condenser; recover, evacuate and recharge Air Conditioning System. Includes: R&I Air Conditioning Compressor. Includes: Confirm Fluid temperature for level check.	39.0		A
Combination Procedure: CAMSHAFT BEARING: Remove & Replace: NOTE: This operation applies to full circle, resistance fit bearings only. For split cap type bearings use Camshaft - R&R.
Each		0.3		A
Combination Procedure: OIL PUMP: Overhaul:
		0.6		B