LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Object Detection System And Pedestrian Protection System) >> Diagnostic Information and Procedures >> DTC B390D: Frontview Camera Module >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify there are no DTCs set, except for DTC B390D.
    • If no other DTCs are set 
  3. NOTE:

    Before performing the calibration, verify that the B174W Frontview Camera - Windshield will not have difficulty seeing lane markings in front of the vehicle. If the view of the B174W Frontview Camera - Windshield is blocked with mud, dirt, snow, ice, or slush, if the windshield is damaged, or if weather limits visibility, such as while driving in fog, rain, or snow conditions, the calibration procedure may not be able to be completed.

  4. Calibrate the B174W Frontview Camera - Windshield. Refer to Front View Camera Module Calibration .
  5. Verify DTC B390D is not set
    • If DTC B390D is set 

      Replace the B174W Frontview Camera - Windshield.

    • If DTC B390D is not set 
  6. All OK.