Remote Control Door Lock Receiver Replacement

Fig 1: Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the left side body lock pillar upper trim panel. Refer to Body Lock Pillar Upper Trim Panel Replacement
1	Remote Control Door Lock Receiver Procedure Disconnect the electrical connector. Unsnap the 2 upper receiver tabs and tilt the receiver downward from the receiver bracket. Refer to Control Module References for programming and set up, if required.

Callout

Component Name

Preliminary Procedure
Remove the left side body lock pillar upper trim panel. Refer to Body Lock Pillar Upper Trim Panel Replacement

Remote Control Door Lock Receiver

Procedure

Disconnect the electrical connector.
Unsnap the 2 upper receiver tabs and tilt the receiver downward from the receiver bracket.
Refer to Control Module References for programming and set up, if required.