Removal & Installation
WARNING: This page is about the Volt LT, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Manual High Voltage Disable Method | DOES NOT include wheel alignment. Includes: Disable and Enable High Voltage System. Includes: R&I Subframe. | 13.9 | C | |
| Scan Tool High Voltage Disable Method | DOES NOT include wheel alignment. Includes: Disable and Enable High Voltage System. Includes: R&I Subframe. | 13.4 | C | |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.6 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: | ||||
| Axle Shaft Seal,Each | 0.2 | B | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||