Hybrid Powertrain Control Module 2 Replacement

Fig 1: Hybrid Powertrain Control Module 2

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection Remove Instrument Panel Compartment. Refer to Instrument Panel Compartment Replacement Remove Instrument Panel Lower Trim Panel Insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement
1	Hybrid Powertrain Control Module 2 Bracket Bolts (Qty: 2) CAUTION: Refer to Fastener Caution Tighten 9 N.m (80 lb in)
2	Hybrid Powertrain Control Module 2 Procedure Disconnect the electrical connectors. Remove the module from the retaining tab on the bracket. Programming and Setup. Refer to Control Module References

Callout

Component Name

Preliminary Procedures

Disconnect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
Remove Instrument Panel Compartment. Refer to Instrument Panel Compartment Replacement
Remove Instrument Panel Lower Trim Panel Insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement

Hybrid Powertrain Control Module 2 Bracket Bolts (Qty: 2)

CAUTION:

Tighten
9 N.m (80 lb in)

Hybrid Powertrain Control Module 2

Procedure