Pedestrian Sound Alert Module Replacement

Fig 1: Pedestrian Sound Alert Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Reposition the right side front seat to gain access to the module. Refer to Driver or Passenger Seat Removal and Installation NOTE: It is not necessary to remove the seat from the vehicle.
1	Pedestrian Sound Alert Module Bracket Bolt CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Pedestrian Sound Alert Module Procedure Disconnect the electrical connector. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Preliminary Procedure
Reposition the right side front seat to gain access to the module. Refer to Driver or Passenger Seat Removal and Installation

NOTE:

It is not necessary to remove the seat from the vehicle.

Pedestrian Sound Alert Module Bracket Bolt

CAUTION:

Tighten
9 N.m (80 lb in)

Pedestrian Sound Alert Module

Procedure

Disconnect the electrical connector.
Perform the necessary programming and setup procedure: Control Module References