Keyless Entry Control Module Replacement

Fig 1: Keyless Entry Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the left side quarter lower rear trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side)
1	Keyless Entry Control Module Procedure Release the plastic retaining tabs. Disconnect the electrical connectors. Refer to Control Module References for programming and setup information, if required.

Callout

Component Name

Preliminary Procedure
Remove the left side quarter lower rear trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side)

Keyless Entry Control Module

Procedure

Release the plastic retaining tabs.
Disconnect the electrical connectors.
Refer to Control Module References for programming and setup information, if required.