Keyless Entry Control Module Bracket Replacement

Fig 1: Keyless Entry Control Module Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove Instrument Cluster. Refer to Instrument Cluster Replacement Disconnect the electrical connectors for keyless entry control module and serial data gateway module.
1	Keyless Entry Control Module Bracket Bolt (Qty: 3) CAUTION: Refer to Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Keyless Entry Control Module Bracket Procedure Transfer keyless entry control module and serial data gateway module as necessary.

Callout

Component Name

Preliminary Procedures

Remove Instrument Cluster. Refer to Instrument Cluster Replacement
Disconnect the electrical connectors for keyless entry control module and serial data gateway module.

Keyless Entry Control Module Bracket Bolt (Qty: 3)

CAUTION:

Tighten
2.5 N.m (22 lb in)

Keyless Entry Control Module Bracket
Procedure
Transfer keyless entry control module and serial data gateway module as necessary.