Circuit/System Verification
- Verify the cooling system is filled to the correct coolant level. Refer to Cooling System Leak Testing
, and Cooling System Draining and Filling
.
- If the coolant level is not correct
Repair as necessary
- Go to next step: If the coolant level is correct
- If the coolant level is not correct
- Verify the DTC P0116, P0117, P0118 is not set.
- If any of the DTCs are set
- Go to next step: If none of the DTCs are set
- Operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that you observed from the freeze frame/failure Records data.
- Engine running at idle speed for 65 minutes.
- If any of the DTCs set
Refer to Component Testing.
- Go to next step: If none of the DTCs set
- If any of the DTCs set
- All OK