Component Testing
- Remove EVAP canister with EVAP Canister Vent Solenoid Valve and Fuel Tank Pressure Sensor attached.
- Check if water will drain from the canister ports when the canister is inverted.
- If water leaks out, replace the EVAP canister.
- Weigh the EVAP canister assembly with the EVAP Canister Vent Solenoid Valve and Fuel Tank Pressure Sensor attached, the weight should be less than 2.1 kg (4.8 lb).
- If over the specified weight, replace the EVAP canister.
- If less than the specified weight.
- All OK.