Power Steering Control Module Scan Tool Information
Power Steering Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Calculated System Temperature | - | Varies | This displays ° C. This is the current system temperature. |
| Steering Wheel Input Torque | - | Varies | This displays N.m. This displays the current steering input torque in N.m. |
| Engine Speed | - | 0 RPM | This displays RPM. This is the current engine speed from the ECM. |
| Vehicle Speed | - | 0 Km/h (0 MPH) | This displays km/h (mph). This is the current vehicle speed. |
| Motor Feedback Current | - | Varies | This displays amps (A). This displays the Electric Power Steering Motor Current Feedback. |
| Delivered Torque | - | Varies | This displays N.m. This displays the current value of the Output Torque of the Electric Power Steering. |
| Battery Voltage | - | Varies | This displays Volts. This is the current battery voltage. |
| Motor Signal | - | Varies | This displays amps (A). This displays the amount of current commanded by the Electric Power Steering Motor. |
| Assist Level | - | Varies | This displays the percentage (%) of power steering assist being provided. |
| Warning Lamp | - | Varies | This displays the status of the EPS warning lamp. |