Transmission Control Module (TCM) Reprogramming
NOTE:
Use a scan tool to view and record the Transmission Control Module - End Model Part Number in the original TCM prior to starting the TCM reprogramming procedure.
To reprogram an existing K71 Transmission Control Module, perform the following procedure:
- Using a Scan Tool, access the Service Programming System (SPS) and follow the on-screen instructions.
- Perform the SPS function, Prepare Control Module for Removal, if available.
- Perform the SPS function K71 Transmission Control Module-Programming and follow the on-screen instructions.
- Clear DTC's after completing the Programming procedure.NOTE:
If vehicle fails to start during Configuration and Setup, perform the SPS Function Immobilizer Learn and follow the on-screen instructions.
- Perform the SPS function K71 Transmission Control Module-Configuration and follow the on-screen instructions, if available.NOTE:
When prompted select the file from Prepare Control Module for Removal.
- Clear DTC's after completing the Configuration & Setup procedure.