Circuit/System Verification

Verify no other DTCs are set
- If other DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If no other DTCs are set
Ignition ON.
Verify the S3 Transmission Shift Lever moves out of the PARK position when the brake pedal is applied.
- If the S3 Transmission Shift Lever does not move out of the PARK position
  Refer to Circuit/System Testing following below.
- Go to next step: If the S3 Transmission Shift Lever does move out of the PARK position
  All OK.