LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Engine Control Module and Electronic Brake Control Module Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove Engine Control Module Bracket Replacement 
    2. Fig 1: Body Wiring Harness Connector And Electronic Brake Control Module Bracket
    GM3680283Courtesy of GENERAL MOTORS COMPANY
  2. Clip out the body wiring harness connector (3) from the engine control module and electronic brake control module bracket (2).
  3. Disconnect the engine wiring harness connector (4) from the body wiring harness connector (3).
  4. Unclip Engine Wiring Harness (1)
    5. Fig 2: Engine Wiring Harness And Electronic Brake Control Module Bracket
    GM3707209Courtesy of GENERAL MOTORS COMPANY
  5. Clip out the engine wiring harness (1) from the engine control module and electronic brake control module bracket (3).
  6. Clip out battery positive and negative cable (2) from the engine control module and electronic brake control module bracket (3).
    7. Fig 3: Transmission Mount, Body Wiring Harness Connector, Engine Control Module And Electronic Brake Control Module Bracket Bolts
    GM3680284Courtesy of GENERAL MOTORS COMPANY
  7. Unclip Body Wiring Harness (3).
  8. Clip out the body wiring harness connector (5).
  9. Remove the 2 engine control module and electronic brake control module bracket bolts (2, 6).
  10. Remove the engine control module and electronic brake control module bracket (1) from the transmission mount (4).
scientia non olet · About LEMON Manuals