Removal Procedure
WARNING:
WARNING:
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Drain the fuel tank. Fuel Tank Draining
- Relieve the fuel pressure:Fuel Pressure Relief
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove Exhaust System (1)Exhaust System Replacement (Notchback)Exhaust System Replacement (Hatchback)
- Remove Fuel Tank Heat Shield (1) Fuel Tank Heat Shield Replacement (1.4L LE2, and 1.6L Diesel LH7 - Notchback)
- Remove Parking Brake Cable Nut (3)
- Remove Parking Brake Cable (2) @Retainer (4)
- Remove Parking Brake Cable (2) @Parking Brake Cable Bracket (1) -
- Hang both parking brake cables aside.
- Disconnect Fuel Feed Pipe - Underbody (1) Plastic Collar Quick Connect Fitting Service .
- Disconnect the evaporative emission canister front pipe (1). Plastic Collar Quick Connect Fitting Service
- Close all connections with EN-6015 plugs.
- Disconnect Evaporative Emission Canister Filter Pipe (2) @Evaporative Emission Canister (1) Plastic Collar Quick Connect Fitting Service
- Position aside Evaporative Emission Canister Filter Pipe (2)
- Disconnect the electrical connector.(1)
- Support the fuel tank with a suitable jack.(3)
- Fuel Tank Strap Bolt (4)
- Fuel Tank Strap (2)
- Remove the fuel tank (1) by retracting the jack (3).
- Remove the fuel tank (1) from the jack (3).
NOTE:
Do not cut the exhaust system.
NOTE:
A second technician is required.