Peripheral Human Machine Interface Control Module Replacement

Fig 1: Peripheral Human Machine Interface Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Rear Window Panel Trim. Refer to Rear Window Panel Trim Replacement
1	Peripheral Human Machine Interface Control Module Bracket Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Peripheral Human Machine Interface Control Module Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and setup information, if required.

Callout

Component Name

Preliminary Procedure
Remove Rear Window Panel Trim. Refer to Rear Window Panel Trim Replacement

Peripheral Human Machine Interface Control Module Bracket Bolt (Qty: 3)

CAUTION:

Tighten
2.5 N.m (22 lb in)

Peripheral Human Machine Interface Control Module

Procedure

Disconnect the electrical connectors.
Refer to Control Module References for programming and setup information, if required.