LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> SS Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LS3) - Repair Instructions >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement .
    2. Fig 1: Fuel Injector, Fuel Rail, Retaining Clips And Seals
    GM3292843Courtesy of GENERAL MOTORS COMPANY
  2. Remove the fuel injector to fuel rail assembly retaining clips (2).
    3. CAUTION:

    Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.

  3. Remove the fuel injector (4) from the fuel rail (1).
  4. Remove the injector lower O-ring seal (5) from the spray tip end of each injector and discard.
  5. Remove the injector upper O-ring seal (3) from the fuel rail end of each injector and discard.
scientia non olet · About LEMON Manuals