Component Testing
- Ignition OFF, disconnect the harness connector at the S148E Multifunction Switch - Center Console.
- Test for infinite resistance between the signal terminal 5 and the ground terminal 9 with the switch in the open position.
- If less than infinite resistance
Replace the S148E Multifunction Switch - Center Console.
- If less than infinite resistance
- Test for less than 2 Ω between the signal terminal 5 and the ground terminal 9 with the switch in the closed position.
- If 2 Ω or greater
Replace the S148E Multifunction Switch - Center Console.
- If less than 2 Ω
- If 2 Ω or greater
- All OK.