Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Steering Gear Boot Inner Clamp |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Gear Bolt | |
|
50 N.m (37 lb ft) |
|
115 - 125 degrees |
| Steering Linkage Outer Tie Rod Nut | |
|
25 N.m (18 lb ft) |
|
115 - 125 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Linkage Inner Tie Rod | 98 N.m (72 lb ft) |